Powerflex Bushes for Ford Sierra 3Dr & Sapphire RS Cosworth 2WD Rear Trailing Arm Outer Bush

Product code.: PFR19-110-4

from 1 £ 30.95 + 20.00% VAT
-
+

Short Description

Ford Sierra 3Dr & Sapphire RS Cosworth 2WD Rear Trailing Arm Outer Bush. PFR19-111 - Inner bush kit is supplied with mounting bolt. Original Ford bolt needs to be cut off to be removed. Full details enclosed with fitting instructions. The inner bush kit (PFR19-111) is complete with two M12 x 90mm bolts and nylock nuts. It is not possible to remove the old bush from the inner swinging arm because of the location of the rear differential. To remove the old bush it is best to undo the retaining nut and then cut the head off of the bolt with a hacksaw or angle grinder. Then remove the bolt from the nut end. Fit the new bushes the rear beam assembly needs to be lowered to enable removal of the old bushes. It may be necessary to remove the rear trailing arm complete and use a hydraulic press to remove the old bushes. Re-assemble these bushes into suspension components using a small smear of the grease supplied. To get the most benefit from your new bushes we recommend that the suspension geometry is checked and set after fitting any new bushes. These Suspension bushes are made from a special type of Polyurethane which have special unique qualities, meaning they will last longer and are less likely to perish through wear and tear and road debris such as oil, tar and salt. The bushes have the ability to offer a smoother drive without vibration or noise, and come with a lifetime warranty.

Viezu Select Parts Fitting or ShippingViezu Select service means you can chose to have your vehicle parts shipped to you or your chosen location; simply enter the delivery address you require when you process your order.  

Fitting - alternatively you can trust Viezu to fit your items for you in our fully equipped Workshop in Warwickshire. Please note parts installation attract additional fees for labour. Please contact our Support Team on info@viezu.com or select simply MAKE AN APPOINTMENT for installation; please note electronic bookings attract a £10 booking fee which is off-set against labor fees and fully deducted from any invoice balance once fitting is complete.

Software and Software Upgrades Only - Engine Remaps, Tunes and Software Upgrades can be installed by your nearest Approved Viezu Dealer at no additional cost. The Viezu Customer Support Team will contact you to arrange an appointment as part of processing your order.  Alternatively, you can secure your booking by selecting MAKE AN APPOINTMENT for installation, please note electronic bookings attract a small refundable £10 booking fee which is fully refunded once the remap is installed.

Quality Matters - Viezu is an ISO 9001 Registered Organisation with the British Standards Institute and Winners of The Queens Award for Enterprise.
 

Last seen 1