-
€144.57 VAT will be applied at the time of checkout Select OptionsAlientech KESS3 Unlock Module
Alientech KESS3 Unlock Module
The Alientech KESS3 Unlock Module is a dedicated BOOT accessory for unlocking supported protected Bosch MD1 and MG1 ECUs directly in the workshop. Used alongside KESS3, it manages the BOOT Unlock procedure on selected locked ECUs fitted to vehicles from 2021 onwards. Once unlocked, KESS3 can access the ECU for BOOT-mode reading, writing and complete backup operations.
Complete kit for connection in Boot mode to Bosch MD1 and MG1 ECUs. It enables interfacing with the control unit, allowing the unlock and programming operations supported by the KESS3 tool to be performed.
Currently out of stock – awaiting new stock
€144.57 VAT will be applied at the time of checkout -
€1,884.96 VAT will be applied at the time of checkout Select OptionsKorhex Boot Glitch MCU Access Tool for Flex
Korhex Boot Glitch MCU Access Tool for Flex
Korhex is a dedicated hardware extension for the Magicmotorsport Flex ECU and TCU programmer, created for direct MCU access during supported Boot Glitch and ECU unlocking procedures. Using a dedicated mask and a single contact point on the microcontroller, it reduces bench preparation by avoiding board flipping, resistor desoldering and manual Boot pin wiring where the Flex procedure supports this method.
For Flex Full Master and Full Slave customers, only the Korhex device needs to be purchased.
Flex customers who do not have a Full configuration must purchase an additional protocol to (FLS0.2S/FLS0.2M or FLS0.20S/FLS0.20M) to enable Boot Glitch activation. You will need to purchase the Korhex device.
Taking orders, but due to overwhelming demand we expect up to 4 weeks delivery at present.
If you are unsure please contact a member of our team here to request information or call: +44 (0)1789 774444.
€1,884.96 VAT will be applied at the time of checkout -
€250.22 VAT will be applied at the time of checkout Select OptionsBattery Charger and Stabilizer for Programming & Remapping
Battery Charger and Stabilizer for Programming & Remapping
Our Battery Charger is a versatile and intelligent battery stabilizer, suitable for all 12V and 24V battery types, including AGM, GEL, WET, STD, and LFP. With fast and slow charging options up to 30A, high 93% efficiency, and a stabilised 13.6V power supply mode for vehicle tuning and diagnostics, it’s the ideal solution for automotive workshops and professional tuners.
€250.22 VAT will be applied at the time of checkout -
€305.82 VAT will be applied at the time of checkout Select OptionsCTEK PRO25S Battery Stabiliser
CTEK PRO25S Battery Stabiliser
PRO25S is the perfect battery support and charging solution to fully complement everyday workshop programming and diagnostic equipment.
€305.82 VAT will be applied at the time of checkout -
€25.20 – €160.00 VAT will be applied at the time of checkoutSelect OptionsMagic Motorsport Flexible Tool Case
Magic Motorsport Flexible Tool Case
This Magic Motorsport Tool Case has been designed to contain all the tools and accessories needed for on the site jobs.
- 20% bigger
- Four internal pockets
- Ergonomic handle
- Locking system
- Three versions:
- Classic
- Pro
- Hybrid
-
€382.55 VAT will be applied at the time of checkout Select OptionsDimsport – Bike Bag – Set of wirings and connectors
Dimsport – Bike Bag – Set of wirings and connectors
-
High-quality cables ensuring stable connections between The Genius and various ECUs/TCUs.
-
Compatible with a wide range of vehicles: cars, motorcycles, and trucks.
-
Facilitates non-invasive tuning operations, reducing risk and improving efficiency.
-
Available in comprehensive kits and individual connectors tailored to specific control units.
€382.55 VAT will be applied at the time of checkout -
-
€382.55 VAT will be applied at the time of checkout Select OptionsDimsport – Car Bag – Set of wirings and connectors
Dimsport – Car Bag – Set of wirings and connectors
-
High-quality cables ensuring stable connections between The Genius and various ECUs/TCUs.
-
Compatible with a wide range of vehicles: cars, motorcycles, and trucks.
-
Facilitates non-invasive tuning operations, reducing risk and improving efficiency.
-
Available in comprehensive kits and individual connectors tailored to specific control units.
€382.55 VAT will be applied at the time of checkout -
-
€717.28 VAT will be applied at the time of checkout Select OptionsDimsport – Marine Bag – Set of wirings and connectors
Dimsport – Marine Bag – Set of wirings and connectors
-
High-quality cables ensuring stable connections between The Genius and various ECUs/TCUs.
-
Compatible with a wide range of vehicles: cars, motorcycles, and trucks.
-
Facilitates non-invasive tuning operations, reducing risk and improving efficiency.
-
Available in comprehensive kits and individual connectors tailored to specific control units.
€717.28 VAT will be applied at the time of checkout -
-
€736.19 VAT will be applied at the time of checkout Select OptionsDimsport – Tractor Bag – Set of wirings and connectors
Dimsport – Tractor Bag – Set of wirings and connectors
-
High-quality cables ensuring stable connections between The Genius and various ECUs/TCUs.
-
Compatible with a wide range of vehicles: cars, motorcycles, and trucks.
-
Facilitates non-invasive tuning operations, reducing risk and improving efficiency.
-
Available in comprehensive kits and individual connectors tailored to specific control units.
€736.19 VAT will be applied at the time of checkout -
€ EUR
