Live Gasoline Tuning Webinar – Audi S3 2.0 TFSI with ECM Titanium 3.0
This map writing software demonstration from VIEZU Technologies is your chance to gain hands-on insights into Gasoline ECU tuning using ECM Titanium 3.0. Using the Audi S3 2.0TFSI (Bosch MED17.5 ECU) as a case study, we’ll guide you through the process. from safe ECU reading to map identification, practical Stage 1 adjustments, and validation techniques.
This Webinar took place on Tuesday 21st October to watch the recording of this event, please check out the video below.
What This Webinar Covered.
ECM Titanium 3.0 Overview
- The SMART tuning methodology for Stage 1 Gasoline Performance Tuning
- Map Identification and Investigation: Understanding the key maps required for tuning and exploring the stage 1 performance tuning within the stock ECU calibration data.
- Stage 1 Performance Tuning: How to safely and effectively modify the ECU data for a smooth and progressive stage 1 performance tune.
- Writing back and Validation: Checksums, after writing checks, datalogging and dyno testing.
Map Identification and Investigation
- Key maps: Requested engine load, torque management, desired lambda, turbo pressure control & limiters, rail pressure, ignition angle and more
- Investigation: Identifying the stage 1 performance tuning potential within the stock ECU calibration data.
Stage 1 Performance Tuning
- Modification methods to adjust torque request/limiters and fuel system adjustments along with ignition timing, and rail pressure adjustments to unlock the vehicles’ safe potential.
- Optimization of the turbo system to deliver a reliable increase in boost pressure to support the modified fueling for a reliable stage 1 performance tune.
Writing Back & Validation
- Brief mention of checksum handling, flashing and DTC clearing.
- Validation via logs/dyno (boost, AFR, torque, ignition timing); iterative refinement; typical Stage 1 improvements (no fixed figures).
-
$230.00 – $1,351.00 VAT will be applied at the time of checkoutSelect OptionsAlientech ECM Titanium 3.0
Alientech ECM Titanium 3.0
Alientech ECM Titanium 3.0
The Alientech ECM Titanium remapping software developed by Alientech allows the user to be able to view and tune without any external assistance any of the original calibrations for engine and transmission control units.
The software is held on a Dongle security key. ECM Titanium 3.0 software is available in FULL version which must combined with a subscription and will give you unlimited access and can be used with any Master KESS tool; PROMO Version which must be combined with a subscription and will give you unlimited access but must be paired with a specific master KESS tool; or Credit version which gives you full control over how much you spend.
Black Friday Promotion: Buy ECM Titanium tuning software and get 3 free training modules. Visit Remap101 to see which courses you’re interested in. We’ll apply the courses to your order after purchase.
Get an additional 30% off RRP on ECM Titanium 3.0 software activations.
-
$288.00 – $477.00 VAT will be applied at the time of checkoutSelect OptionsAlientech ECM Titanium 3.0 Subscriptions
Alientech ECM Titanium 3.0 Subscriptions
Alientech ECM Titanium 3.0
The Alientech ECM Titanium remapping software developed by Alientech allows the user to be able to view and tune without any external assistance any of the original calibrations for engine and transmission control units.
Choose between a 12 Month Subscription or 6 Month Subscription below.
For a limited time only, get 10% off your subscription price.
